Redgard Pro-White

wall waterproofing, waterproofing, polyurea, repainting, reflective coating,

High Tensile 100% Acrylic Elastomeric

PRODUCT DESCRIPTION

REDGARD PRO WHITE is a high tensile premium 100% acrylic elastomeric coating,
combining non-migratory fire retardants with superior reinforcing laminar pigments. This
combination provides excellent abrasion and hail resistance with outstanding U.V. protection
while maintaining exceptional flexibility at below freezing temperatures.

  • Reduces existing roof substrate temperature; helps reduce interior temperature
  • Helps reduce thermal shock
  • Reduced interior temperature helps reduce load on A/C equipment
  • Excellent flexibility

May be applied by spray or heavy nap roller. However, airless spray is recommended for
consistency.

  • All surfaces must be clean, dry, and free of dirt, grease, oil, or other contaminants that
    would interfere with proper adhesion.
  • Apply in two separate coats at the rate of 1 gallon per square feet per coat minimum.
  • Apply at temperatures above 50° F and rising.
  • Apply only when weather conditions will permit drying before rain, dew or freezing
    temperatures occur.
  • Acrylic-based coatings must cure before being subjected to freezing or moisture. Example
    of ideal conditions: 4-6 hours above 70° F and low humidity.
Property Test Method Typical Value
Viscosity CPS Brookfield LVT#4 @ 60rpm 6500-8500
Solids by Volume (%) ASTM D-2697 53%
Solids by Weight (%) ASTM D-1644 63%
Weight per gallon ASTM D-1475 11 lbs
Coverage (Mils/100sf/gal) 8.5 Dry Mils/16 Wet Mils
Clean-up Water/td>
Re-coat Time (hrs.) Normally 4-8 hours
Property Test Method Typical Value
Elongation (%) ASTM D-2370 450 % @ 75˚F
Elongation (%) ASTM D-2370 100 % @ 0˚F
Tensile Strength (psi) ASTM D-2370 100 % @ 0˚F
Tensile Strength (psi) ASTM D-2370 2100 psi @ 0˚F
Perm Rating ASTM D-1653 670 psi @ 75˚F
Low Temp Flexibility ASTM D-522 1/8"
APPROVALS
UL 790 Class A (NC) (C-15/32); Class B (C-15/32)
UL 1256 Class 90
UL 580 165 psf
UL 2218 Class 1