Redgard SCP20

SINGLE COMPONENT ALIPHATIC POLYUREA/
POLYASPARTIC COATING

SOLID COLOR FLOOR SYSTEM

PRODUCT DESCRIPTION

Redgard SCP20 is a single component roll-on, aliphatic, cross-linked Polyurea/Polyaspartic coating with high gloss finish.

TECHNICAL DATA PHYSICAL PROPERTIES

SCP20 POLYUREA COATING

Non-compliant SCAQMD areas 250 gm/liter(voc)
Pot Life @ 75˚F(24˚C) 50% RH Single component
Curing (each coat) 2-6 hours
Light foot traffic 8-12 hours
Wheel traffic 2-3 days
Tack free @ 72˚F 2-3 hours
Total Solid Content (Volume) 62%
Elongation ASTM D412 25%
Tensile (psi) 4800 (clear)
Color stability excellent 100% aliphatic
Tear ASTM D-624 550 lbs./in
Hardiness ASTM D-2240 70-75 D
Shelf life 12 months
Viscosity range (SC) 800 cps

COLOR FLAKE FLOOR SYSTEM

STANDARD COLOR PACKS AVAILABLE

Manufactured for:
Redgard Coating Solutions Co., Ltd.
By Specguard Corporation
909 Mahar Ave, Wilmington, CA 90744

ABRASION RESISTANCE ASTM 4060-90

Taber Abrader CS-17 Wheel 12.0 mg loss 1000 gm/1000 cycles

COVERAGE RATES (Dry) (Per Gallon) Subject to substrate condition (estimate) 2.0 Mils = 500 sqft/4 Mils = 250 sqft. / 8 Mils = 125 sqft.

 

Chemical Resistance ASTM D543
(24 hour full Immersion)

Sulfuric Acid 5% G
Sulfuric Acid 10% F
Citric Acid 1% E
Isopropyl Alcohol 99% F
Aviation Fuel G
Diesel Fuel G
Gasoline E
Ammonia E
Sodium Hydroxide E
Sodium Hypo Chlorite 5% E
Lactic Acid F
Hot Tire E
Brake Fluid P
Sulfuric Acid (Battery, Acid) F

Rating:
E = No Effect
G = Limited Effect
F = Moderate Effect
P = Unsatisfactory

PRECAUTIONS
Moisture vapor emission in the concrete (MVE) to be less than 3-pounds per 1000 sqft. for 24-hour period. Calcium Chloride test ASTM F1869-98 recommended.  Should not be applied in direct sunlight or on elevated surface temperatures. SCP20 clear coating is not permeable and may turn opaque or cloudy in exterior application due to ground moisture penetration.  UV stable product recommended for indoor applications only.